Renia Aquilim 315 Water-Based Contact Adhesive

Price range: £13.95 through £25.95

Choosing the right Aquilim adhesive
Aquilim 315 is a proven universal contact adhesive for leather and mixed-material work. See our Aquilim guide for each product's uses.
Unsure? Compare the Aquilim range before ordering.

The most widely used water-based leather adhesive. Universal across leather and mixed materials. Reliable, proven bond. Low odour, dries clear. Made in Germany.

Read our complete Aquilim guide →

Renia Aquilim 315 solvent-free water-based leather adhesive shown with the original container and 200g pot
This item: Renia Aquilim 315 Water-Based Contact Adhesive
Product variation
Price range: £13.95 through £25.95
Price range: £13.95 through £25.95
Works with this adhesive
Renia Aquilim silicone glue brush 3cm for applying water-based leather adhesive
£4.95
Blue plastic glue spreaders pack of 10 for applying leather adhesive
£3.25
Also available
Renia Aquilim 330 Water-Based Contact Adhesive
View Price range: £14.45 through £28.95
Renia Aquilim 330 water-based leather adhesive shown with the original container and 200g pot
Also available
Renia Aquilim GL Water-Based Stitching Adhesive
View Price range: £13.95 through £26.45
Renia Aquilim GL water-based leather adhesive shown with the original container and 200g pot
Also available
Renia Aquilim SG Water-Based Positioning Adhesive
View Price range: £11.95 through £21.45
Renia Aquilim SG solvent-free water-based leather adhesive shown with the original container and 200g pot

Description

Aquilim 315 is the adhesive that defined Renia’s water-based range. It has been used in professional leather and footwear workshops across Europe for years, and it remains a proven universal contact adhesive for leather and mixed-material work.

Key Details

  • Proven water-based contact adhesive — the most widely used in the Aquilim range
  • Up to 8 hours open time
  • Suited to mixed-material work — leather, rubber, cork, EVA, PU, textile, felt, wood and metal
  • Approximately 20–40 minutes drying time before joining; join when the film is transparent
  • Maximum bond strength after approximately 2–3 days
  • Flesh to flesh: apply one side only, press directly into wet adhesive — no waiting
  • Water-based — no solvents, no fumes, dries clear
  • Suitable for leather, cork, felt, textiles, wood, foam, cardboard and rubber. Not suitable for soft PVC.
  • Store above 4°C — will not recover if frozen
  • Made in Germany by Renia
  • Available in 200g and 500g pots

How to Use

Flesh to flesh shortcut. The same one-sided wet application that works on 330 works on 315: apply to one surface only and press the other piece directly into the wet adhesive — no waiting. Confirmed by Renia. Works for flesh-to-flesh bonding only. For grain side surfaces or mixed materials, use the standard two-sided application.

Same working principles as 330: apply thin and even, allow approximately 20 to 40 minutes to dry until clear, press firmly together. Maximum bond strength after approximately 2–3 days. Water-based, no fumes, dries clear. Thin with water if needed.

Store above 4°C at all times. Freezing destroys the emulsion — a frozen Aquilim product cannot be recovered.

Where Aquilim 315 Fits

Aquilim 315 is a universal water-based contact adhesive for leather and mixed-material work — leather, rubber, cork, EVA, PU, textile, felt, wood and metal. If you are regularly bonding leather to cork, foam or textile, or working across materials in the same build, it was built for that range.

Not sure which Aquilim suits your project? Read our Renia Aquilim guide.

Technical Data Sheet (PDF)

Renia Aquilim at Hideout Craft — full product range and specifications
About Renia — who Renia are and why we stock them

Additional information

Weight N/A
Dimensions N/A
Size

200g, 500g

Reviews

There are no reviews yet

Be the first to review “Renia Aquilim 315 Water-Based Contact Adhesive”

Your email address will not be published. Required fields are marked *

0