Renia Aquilim GL Water-Based Stitching Adhesive

Description

Most contact adhesives and leather cements are not designed for stitching through. They either gum up the needle, resist the thread, or leave a stiff bond line that affects how the seam sits. Aquilim GL is designed for exactly this job — bonding pieces that will be sewn afterwards.

Key Details

• Designed specifically for bond-then-sew work
• Flexible adhesive film when dry — needle passes cleanly, stitch channels stay open
• Drying time is approximately 1 minute; fix the parts together within 1–5 minutes of application
• Multiple removal and correction of the bonded parts is possible
• Sew immediately after pressing — no waiting
• Water-based — no solvents, no fumes
• Suitable for belts, bags, straps, wallets, leather panel assembly
• Store above 10°C — will not recover if frozen
• Made in Germany by Renia
• Available in 200g and 500g pots

How to Use

Apply the adhesive to the required surface and allow it to dry for approximately 1 minute. Fix the parts together within 1–5 minutes of application. Multiple removal and correction of the bonded parts is possible. The parts can be stitched or sewn immediately. Single-sided application is possible for absorbent materials.

Store above 10°C at all times. Freezing destroys the emulsion and the product cannot be recovered.

Why the Film Stays Flexible

The difference is in the adhesive film itself. Once GL dries, the film stays flexible rather than hardening. When the needle passes through, it goes cleanly — no drag, no gumming, no stitch channel that closes over before the thread follows. This is not a workaround or a compromise. It is how the product was formulated, specifically for the leather and footwear trade where sewing through bonded layers is standard practice.

This is the adhesive to reach for on belts, bag straps, bag panels, and any assembly where the stitch line crosses the glued area. If your needle never crosses the glue line, standard 330 is fine and simpler. But if you are stitching through bonded leather — and most leatherworkers are — GL is the correct tool for that job.

For the full breakdown of when to use GL versus SG, and how both sit within the Aquilim range, read our Renia Aquilim guide.

Technical Data Sheet (PDF)

Renia Aquilim at Hideout Craft — full product range and specifications
About Renia — who Renia are and why we stock them