Renia 3D Embossing Filler

Description

If you do decorative embossing work, you will know the traditional method — mixing cork filler, leather meal and binder to build up a raised effect behind a stamp or punch. Renia’s 3D Embossing Filler does the same job without the mixing. Ready straight from the tin.

Key Details

• Ready to use straight from the tin — no mixing required
• Compatible with all Renia adhesives
• Can be thinned with Gummilösung if needed
• Shelf life: at least 12 months

How to Use

Apply a coat of Renia Gummilösung to the back of the leather first and allow to dry — this gives the filler something to key into. Then apply the filler, smooth it to the level you want, and leave to dry. Thin layers (up to 1cm) dry in 1–2 hours. For thicker sections, leave overnight.

Once dry it is firm and ready to work with. Stir well before use — or turn the tin upside down occasionally during storage.

Part of the Renia leathercraft adhesive range at Hideout Craft.

Product Sheet (PDF)